United States - English

Current number of specifications

 
John Deere 6175R 4WD Tractor

Selected Dimensions

Dimensions
D. Wheelbase110.2 in2799.1 mm

Specification

Engine
Engine ManufacturerJohn Deere PowerTech PVS
Cylinder linersWet sleeve
Fuel tank capacity87.1 gal329.7 L
Displacement415 cu in6.8 L
AspirationSingle variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Underhood mufflerYes
Power Take-Off(PTO)
Standard1-3/8 in., 540/1000 reversible shaft
Optional1-3/8-in. 540/540E/1000 reversible shaft or 1-3/8-in. 540E/1000/1000E reversible shaft
PTO ActuationElectrohydraulic
Performance
Advertised Engine hp (kW) @ Rated speed175 hp130.5 kw
Advertised PTO hp (kW) @ Rated rpm104 @ 2100 kW 140 @ 2100 PTO hp
Transmission
Standard transmission; forward/reverse20-speed AutoQuad PLUS ECO transmission 40 km/h 20-speed AutoQuad PLUS ECO transmission 25 mph
Optional transmission; forward/reverse16-speed PowrQuad PLUS transmission, 20-speed AutoQuad PLUS ECO transmission (50), John Deere Infinitely Variable Transmission (IVT) (0.050 to 42), or John Deere IVT (0.050 to 50), DirectDrive ECO transmission (40) 24X24 km/h 16-speed PowrQuad PLUS transmission, 20-speed AutoQuad PLUS ECO transmission (31), John Deere Infinitely Variable Transmission (IVT) (0.030 to 26), or John Deere IVT (0.030 to 31), DirectDrive ECO transmission (25) 24X24 mph
Clutch, wet/dryWet
CreeperIncluded with IVT
ReverserLeft-hand base
On-the-Go Shifting (Yes/No/Partial)Yes
Tires
MFWDFront 420/90R30Rear 480/80R46
Hydraulic
Pump rated output 141 gal/min155.2 L/min
Maximum operating pressure2900 psi19994.8 kPa
Remote control valves available3-450 Series Mechanical SCVs standard, 3 to 4 electrohydraulic SCVs; 2 or 4 mechanical SCVs are optional
Hitch Draft Control Load Sense TypeElectrohydraulic
Sensing typeElectronic lower link
Joystick SCV controlMechanical or electronic
TypeClosed-center, pressure/flow compensated
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.Standard 3-450 Series Mechanical SCVs standard, 3 to 4 electrohydraulic SCVs; 2 or 4 mechanical SCVs are optionalOptional N/A
Hitch Category (SAE Designation)Category 3/3N
Final Drive
TypeInboard planetary three pinion
Differential controlsElectrohydraulic
Availability"Front YesFront & Rear Yes"
Engage On-the-Go Rear Differential LockYes
Axle TypeRack and pinion
Brakes, Type and ControlHydraulic wet disk
Operator Station
Rollover protective structureRigid - Foldable - Telescopic N/APlatform - Flat/Straddle N/AGearshift Location - Console/Floor N/A
Dimensions
Limited slip differentialYes
Approx. Shipping Weight17200 lb7801.8 kg
Unballasted Operating Weight17200 lb7801.8 kg
Wheelbase110.2 in2799.1 mm
Front Tread Range1524 to 2235 mm 60 to 88 in.
Front Axle Clearance23.9 in607.1 mm