United States - English

Current number of specifications

 
John Deere 7270R MFWD Tractor

Specification

Wheelbase
MFWD axle ground clearance with standard MFWD tyres19.5 in495.3 mm
MFWD115.2 in2926.1 mm
Engine
Rated engine speed2,100 rpm
Compression ratio16.0:1
LubricationFull-pressure, full-flow filtration with bypass
PTO Power224 hp167 kw
PTO torque rise38 %
Max Power297 hp221.5 kw
AspirationDual turbochargers, variable geometry turbo with fixed geometry turbo in series
DescriptionJohn Deere PowerTech PSS 6.8L Engine: B20 Diesel Compatible, in-line, 6-cylinder, wet-sleeve with 4 valves-in-head
Oil FilterSpin-on canister oil filter
Power boost (available in transport and/or mobile PTO applications)10 %
Bore and Stroke4.19 in. (106 mm) x 5 in. (127 mm)
Filter, engine airDual stage
Displacement415 cu in6.8 L
Electrical
Total cold cranking amps1850 (2-925CCA grp 31 batteries) amps
DescriptionTwo batteries in parallel
Alternator/batteryStandard: 200 amps/12 Volt Available: 240 amps/12 Volt
Fuel System
Fuel tank capacityPST, G47/48 -475L (125 gal), IVT, G47/48- 520L (137 gal.), PST, G49- 497L (131 gal), IVT, G49-543L (143 gal)
DescriptionElectronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming)
Filter Primary10 micron replaceable cartridge with water indication sensor and drain
Filter Secondary2 micron spin-on element
Filter systemTwo-stage with water separator and service-indicator light
DEF Tank Capacity6 gal22.7 L
Required fuel typeUltralow sulfur diesel (B20 diesel compatible)
Power Take-Off(PTO)
PTO Speeds @ Engine rpmStandard: 15,200 lb. (6,895 kg) 9,208 kg max lift Available: 17,300 lb. (7,847 kg) 1,0206 kg max lift. PTO Speed at engine RPM (1:2 ratio)-1,000 PTO rpm at 1,940E rpm
Transmission
e23 Transmission 50K, 31 mph (50 km/hAvailable (50 km/h at 2,004 rpm with group 47 tires, 50 km/h at 1,902 rpm with group 48 tires, 50 km/h at 1,804 rpm with group 49 tires)
John Deere Infinitely Variable Transmission (IVT), 26 mph (40 km/hAvailable
John Deere Infinitely Variable Transmission (IVT), 31 mph (50 km/h)Available
e23 Transmission 40K, 26 mph (40 km/h)Standard (40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires, 40km/h at 1,515 rpm with group 49 tires)
Steering
Hydraulic power-steeringStandard: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel
Active Command Steering (ACS)Available: Variable ratio 15:1 to 23:1 (3.1-5.0 turns lock to lock) w/Stability Augmentation and passive tactile feedback-345mm diameter steering wheel HYDRAULIC SYSTEM
Weights
TLS25738 lb11674.6 kg
Tires
RearGroup 47/48/49 tires available as Singles/Duals
Hydraulic
Maximum operating pressure2958 psi20394.7 kPa
Available flow at front SCVs33 U.S. gpm (126 L/min)
SCV control3, 4 Standard, 5 and 6 Available
DescriptionClosed-center, pressure and flow compensated
Main pump, axial piston (displacement)63 cc standard 85 cc available
Rated flowRated flow, 63 cc pump 43 U.S. gpm (162 L/min) Rated flow, 85 cc pump 59 U.S. gpm (223.3 L/min) Available flow at a single rear SCV 35 U.S. gpm (132 L/min
Available flow at a single rear SCV35 U.S. gpm (132 L/min)
Axles
DiameterRear Axle Diameters: 3.94 x 100.4 in. (100 x 2550 mm) diameter Available — 3.94 x 110.5 in. (100 x 2808 mm) diameter Available — 3.94 x 118.5 in. (100 x 3012 mm) diameter Available — 4.33 x 100.4 in. (110 x 2550 mm) diameter — Available 4.33 x 118.5 in. (110 x 3012 mm) diameter — Available 4.72 x 100.4 in. (120 x 2550 mm) diameter — Available 4.72 x 118.5 in. (120 x 3012 mm) diameter
1300 Series MFWD, tread range 60 to 88 in. (1524 to 2235 mm)Standard
Triple link SuspensionFront Axle: Triple Link Suspension Plus (TLS), tread range 60 to 88 in. (1524 to 2235 mm) Available Triple Link Suspension Plus (TLS), with front brakes, available with 40 km/h transmissions (standard with 50 km/h transmissions) - Available
Final Drive
DescriptionInboard planetary, three pinion
3-Point Hitch
DescriptionRear- Electrohydraulic sensing, Front- Category 3N, available Premium Front Hitch for use with ground-engaging front implements
Lift Capacities - Standard11464 lb5200 kg
Category 3N/3 with Quik-CouplerRear- Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift. Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift Available: 17,300 lb. (7,847 kg) 1,0206 kg max lift