Caterpillar 226D Skid Steer Loader
Dimensions
Dimensions
Ground Clearance
0.58ft in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Bucket Pin Height - Carry Position
8.5in
Bucket Pin Height - Maximum Lift
9.25ft in
Bumper Overhang - Behind Rear Axle
35.21in
Clearance At Maximum Lift And Dump
81.8in
Departure Angle
27.9 degrees
Wheel Base
3.46ft in
Reach - Maximum Lift/Dump
21in
Turning Radius From Center - Bucket
77.8in
Turning Radius From Center - Coupler
43.5in
Turning Radius From Center - Machine Rear
59.6in
Vehicle Width Over Tires
58.9in
Height - Top Of Cab
6.65ft in
Length - With Bucket On Ground
127.3in
Length - Without Bucket
99.4in
Maximum Dump Angle
46.7 degrees
Maximum Overall Height
143.81in
Maximum Reach - With Arms Parallel To Ground
50.7in
Rack Back Angle - Maximum Height
88.9 degrees
Operating Specifications
Breakout Force - Tilt Cylinder
3983lb
Rated Operating Capacity With Optional Counterweight
1650lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Tipping Load
3100lb
Rated Operating Capacity
1550lb
Specifications
Engine
Displacement
134.3cu in
Bore
3.3in
Stroke
3.9in
Net Power - Iso 9249
66.5hp
Gross Power - Sae J1995
67.1hp
Engine Model
Cat C2.2 CRDI
Net Power - Sae 1349
65.8hp
Peak Torque - 1,500 Rpm - Sae J1995
153lb ft
Net Flywheel Power
65.8hp
Power Train
Travel Speed - Forward Or Reverse - One Speed
7.6mph
Travel Speed - Forward Or Reverse - Two Speed Option
11.1mph
Weights
Operating Weight
5705 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow
18 gal/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
35.5hp
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
50.9hp
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3336 psi
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
26 gal/min
Service Refill Capacities
Cooling System
3.2gal
Fuel Tank
15.1gal
Hydraulic Tank
9gal
Engine Crankcase
2.6gal
Hydraulic System
11.9gal
Chain Box - Each Side
1.8gal
Cab
Rops
ISO 3471:2008
Fops
ISO 3449:2005 Level I
Fops Level Ii
ISO 3449:2005 Level II
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
Inside Cab*
83 dB(A)
Outside Cab**
102 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
