Caterpillar 236D Skid Steer Loader
Dimensions
Dimensions
Length With Bucket
11.45ft in
Width Over Tires
5.5ft in
Ground Clearance
7.7in
Height To Top Of Cab
6.83ft in
Wheelbase
3.63ft in
Length W/O Bucket
9.08ft in
Clearance At Max Lift And Dump
7.75ft in
Reach At Max Lift And Dump
16in
Length - With Bucket On Ground
137.31in
Length - Without Bucket
108.9in
Maximum Overall Height
156.6in
Maximum Reach - With Arms Parallel To Ground
53.3in
Rack Back Angle - Maximum Height
91 degrees
Maximum Dump Angle
48 degrees
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Bucket Pin Height - Carry Position
7.5in
Bucket Pin Height - Maximum Lift
10.25ft in
Bumper Overhang - Behind Rear Axle
40.21in
Clearance At Maximum Lift And Dump
92.9in
Departure Angle
26 degrees
Height - Top Of Cab
6.84ft in
Turn Radius From Center - Coupler
51.8in
Turn Radius From Center - Machine Rear
64.5in
Turning Radius From Center - Inc Bucket
85.24in
Vehicle Width Over Tires
66in
Wheel Base
3.63ft in
Reach - Maximum Lift/Dump
16in
Turn Radius From Center - Bucket
83in
Operating Specifications
Rated Operating Capacity With Optional Counterweight
2000lb
Breakout Force - Tilt Cylinder
5074lb
Rated Operating Capacity
1800lb
Tipping Load
3600lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Specifications
Engine
Engine Make
2236
Engine Model
Cat 3.3B DIT (Turbo)
Gross Power
74.3hp
Displacement
203cu in
Bore
3.7in
Stroke
4.7in
Net Power - Iso 9249
73.9hp
Gross Power - Sae J1995
74.3hp
Engine Model
Cat C3.3B DIT (turbo)
Net Power - Sae 1349
73.2hp
Peak Torque - 1,500 Rpm - Sae J1995
195lb ft
Net Flywheel Power
73.2hp
Operational
Operational Weight
6559lb
Fuel Capacity
27.7gal
Cooling System Fluid Capacity
3.7gal
Hydraulic System Fluid Capacity
13.2gal
Max Speed
10.6mph
Chain Box Fluid Capacity - Each Side
2.3gal
Operating Speed
7mph
Power Train
Travel Speed - Forward Or Reverse - One Speed
7mph
Travel Speed - Forward Or Reverse - Two Speed Option
10.6mph
Loader
Breakout Force
5074lb
Tipping Angle
3600degrees
Weights
Operating Weight
6559lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat 10 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Hydraulic
Pump Flow Capacity
20gal/min
Relief Valve Pressure
3335psi
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow
20 gal/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
39hp
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
58hp
Hydraulic Flow - High Flow - Loader Hydraulic Pressure
3335 psi
Hydraulic Flow - High Flow - Loader Hydraulic Flow
30 gal/min
Service Refill Capacities
Cooling System
3.7gal
Fuel Tank
27.7gal
Hydraulic Tank
10.3gal
Engine Crankcase
3gal
Hydraulic System
13.2gal
Chain Box - Each Side
2.3gal
Cab
Rops
ISO 3471:2008
Fops
ISO 3449:2005 Level I
Fops Level Ii
ISO 3449:2005 Level II
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
Inside Cab*
83 dB(A)
Outside Cab**
101 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
