Caterpillar 272D2 XHP Skid Steer Loader
Dimensions
Dimensions
Ground Clearance
0.87ft in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, no optional counterweights, Cat PC 14 17.5 tires and manual quick coupler (unless otherwise noted).
Wheel Base
4.55ft in
Reach - Maximum Lift/Dump
29in
Roll Back Angle
28 degrees
Turning Radius From Center - Bucket (Racked)
90.6in
Turning Radius From Center - Coupler
57.7in
Turning Radius From Center - Machine Rear
74.7in
Vehicle Width Over Tires
76in
Bucket Pin Height - Carry Position
9.31in
Bucket Pin Height - Maximum Lift
10.72ft in
Bucket Pin Reach - Maximum Lift
13.5in
Bumper Overhang - Behind Rear Axle
46.2in
Clearance At Maximum Lift And Dump
97.4in
Departure Angle
28 degrees
Height - Top Of Cab
7ft in
Length - With Bucket On Ground
155in
Length - Without Bucket
127in
Maximum Dump Angle
51 degrees
Maximum Overall Height
161.5in
Maximum Reach - With Arms Parallel To Ground
49.1in
Rack Back Angle - Maximum Height
84 degrees
Operating Specifications
Breakout Force - Tilt Cylinder
7362lb
Rated Operating Capacity
3650lb
Breakout Force - Lift Cylinder
6085lb
Rated Operating Capacity With Optional Counterweight
3900lb
Tipping Load
7300lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, no optional counterweights, Cat PC 14 17.5 tires and manual quick coupler (unless otherwise noted).
Specifications
Engine
Displacement
232cu in
Bore
3.9in
Stroke
4.7in
Net Power - Iso 9249
107hp
Gross Power - Sae J1995
110hp
Engine Model
Cat C3.8 DIT (turbo)
Net Power - Sae 1349
106hp
Peak Torque - 1,500 Rpm - Sae J1995
276lb ft
Net Flywheel Power
106hp
Power Train
Travel Speed - Forward Or Reverse - One Speed
7.2mph
Travel Speed - Forward Or Reverse - Two Speed
10.3mph
Weights
Operating Weight
9255 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, no optional counterweights, Cat PC 14 17.5 tires and manual quick coupler (unless otherwise noted).
Hydraulic System
Hydraulic Flow - Xhp - Maximum Loader Hydraulic Flow*
40 gal/min
Note
*When equipped with Cat 400 Series work tools.
Standard Flow Mode - Loader Hydraulic Pressure
3335 psi
Hydraulic Flow - Xhp - Maximum Loader Hydraulic Pressure
4061 psi
Hydraulic Flow - Xhp - Hydraulic Power (Calculated)
94hp
Standard Flow Mode - Loader Hydraulic Flow
23 gal/min
Standard Flow Mode - Hydraulic Power - Calculated
44hp
Service Refill Capacities
Cooling System
4.1gal
Fuel Tank
32.2gal
Hydraulic Tank
10.3gal
Engine Crankcase
3.5gal
Hydraulic System
14.5gal
Diesel Exhaust Fluid (Def) Tank
5gal
Chain Box - Each Side
2.7gal
Cab
Rops
ISO 3471:2008
Fops
ISO 3449:2005 Level I
Fops Level Ii
ISO 3449:2005 Level II
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab**
83 dB(A)
Outside Cab***
104 dB(A)
