Caterpillar 299D2 XHP Multi Terrain Loader
Dimensions
Dimensions
Ground Clearance
0.8ft in
Bucket Pin Height - Carry Position
7.1in
Bucket Pin Height - Maximum Lift
10.53ft in
Bucket Pin Reach - Maximum Lift
19.4in
Clearance At Maximum Lift And Dump
94.5in
Departure Angle
33 degrees
Height - Top Of Cab
6.97ft in
Length - Track On Ground
69.6in
Length - With Bucket On Ground
154.7in
Length - Without Bucket
125.5in
Maximum Dump Angle
54 degrees
Maximum Overall Height
158.7in
Maximum Reach - With Arms Parallel To Ground
51.9in
Overall Length - Track
89.4in
Rack Back Angle - Maximum Height
81 degrees
Reach - Maximum Lift/Dump
33.6in
Roll Back Angle
25 degrees
Turning Radius From Center - Bucket (Racked)
91.1in
Turning Radius From Center - Coupler
58.1in
Turning Radius From Center - Machine Rear
74in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, no optional counterweights and manual quick coupler (unless otherwise noted).
Vehicle Width (400 Mm/15.7 In Tracks)
76in
Specifications
Engine
Net Power
106hp
Displacement
232cu in
Bore
3.9in
Stroke
4.7in
Net Power - Iso 9249
107hp
Gross Power - Sae J1995
110hp
Engine Model
Cat C3.8 DIT (turbo)
Net Power - Sae 1349
106hp
Peak Torque - 1,500 Rpm - Sae J1995
276lb ft
Operational
Operating Weight
11608lb
Power Train
Travel Speed - Forward Or Reverse - One Speed
5.2mph
Travel Speed - Forward Or Reverse - Two Speed
8.4mph
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, no optional counterweights and manual quick coupler (unless otherwise noted).
Hydraulic System
Hydraulic Flow - Xhp - Maximum Loader Hydraulic Flow*
40 gal/min
Note
*When equipped with Cat 400 Series work tools.
Standard Flow Mode - Loader Hydraulic Pressure
3335 psi
Hydraulic Flow - Xhp - Maximum Loader Hydraulic Pressure
4061 psi
Hydraulic Flow - Xhp - Hydraulic Power (Calculated)
94hp
Standard Flow Mode - Loader Hydraulic Flow
23 gal/min
Standard Flow Mode - Hydraulic Power - Calculated
44hp
Operating Specifications
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, ride control, enclosed cab with glass door, side windows, air conditioning, air ride seat, advanced display, rearview camera, 1,000 CCA battery, dual direction self level, 1981 mm (78 in) dirt bucket, 400 mm (15.7 in) tracks, triple flange front/rear idlers, no optional counterweights and manual quick coupler (unless otherwise noted).
Rated Operating Capacities - 50% Tipping Load
4725lb
Rated Operating Capacities - 35% Tipping Load
3308lb
Ground Contact Area
2184in2
Ground Pressure
5.3 psi
Rated Operating Capacity With Optional Counterweight
4975lb
Tipping Load
9450lb
Breakout Force - Tilt Cylinder
7270lb
Breakout Force - Lift Cylinder
6162lb
Service Refill Capacities
Cooling System
4.1gal
Fuel Tank
32.2gal
Hydraulic Tank
10.3gal
Engine Crankcase
3.5gal
Hydraulic System
14.5gal
Diesel Exhaust Fluid (Def) Tank
5gal
Cab
Rops
ISO 3471:2008
Fops
ISO 3449:2005 Level I
Fops Level Ii
ISO 3449:2005 Level II
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
Inside Cab*
83 dB(A)
Outside Cab**
104 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
