4 compact planetary transmissions with axial piston motors

Triple-race roller bearing with sealed internal gearing

Wet multiple disc brake, spring loaded/hydraulically released

Hydraulic braking of the swing motion by counteracting control

Closed-loop swing circuit with torque control

Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody

3.8rpm

All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system

3000hp

3000hp

2 Cat 3512C

Electric drive option available (1800 kW) on 6060 AC/6060 AC FS

44.5yd3

44.5yd3

134000lb

1300000lb

1298000lb

Robust instrument panel including large colored BCS screen with transflective technology

Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, safety belt, head and armrests

Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat

External sun shields at side and rear windows

Fold-away auxiliary seat with safety belt

FOPS (rock guard; approved according to DIN ISO 3449) integrated into cab structure

All-round safety glass, armored windshield and sliding side window

Windshield with parallel intermittent wiper/washer

Under roof mounted heating ventilating and air conditioning system

Joystick controls integrated in independently adjustable seat consoles

25ft in

7.3ft in

5.3ft in

7.1ft in

Electronic monitoring & data logging system for vital signs & service data of engines, hydraulic system & lubrication system

Sliding emergency ladder (kick-down type) with ladder cage

Machine access via retractable access stairway, stairway angle approximately 45 degrees, hydraulically operated

Roller blinds at all windows

Cat 3512C - 2240 kW (3,000 hp)

Face Shovel (heaped 2:1) - 34.0 m3 (44.5 yd3); Backhoe (heaped 1:1) - 34.0 m3 (44.5 yd3)

Face Shovel - 569 tonnes (627 tons); Backhoe - 570 tonnes (628 tons)

Other track pads available on request.

4.6ft in

1254200lb

25.4 N/cm2 (36.8 psi)

4.6ft in

1257280lb

25.5 N/cm2 (37.0 psi)

4.6ft in

1204370lb

24.4 N/cm2 (35.4 psi)

4.6ft in

1207460lb

24.5 N/cm2 (35.6 psi)

264gal

System failures displayed by Board Control System

Connected to main lube system are: - pivot points of attachment, bucket and cylinders - bottom rollers of undercarriage

Grease filters (200 m) between service station and container as well as directly behind grease pump

Dual-circuit system with hydraulically driven heavy-duty pumps and electronic time relay control to adjust the pause/lube times

Connected to main lube system are: - raceways of swing roller bearing - 2 greasing pinions for the internal gearing of swing ring

4 488 L/min (4 129 gal/min)

Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers

Extremely high cooling efficiency to ensure optimum oil temperature

Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running

Fan speed and flow of oil to the coolers are thermostatically controlled

4 1300 L/min (4 343 gal/min)

4 352 L/min (4 93 gal/min)

4 reversible swash plate pumps

4 swash plate double pumps

4 933 L/min (4 246 gal/min)

4640 psi

5365 psi

3 491 L/min (3 131 gal/min)

5365 psi

4 variable flow axial piston pumps

3 reversible swash plate pumps

1930gal

2483gal

1876gal

1320gal

Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas

Welding procedures allow for internal counter-welding (double prep weld) wherever possible

Booms and sticks are stress-relieved after welding

Catwalks with rails at booms

Inspection holes in booms (FS and BH) and stick (FS)

Guards for shovel cylinders (FS)

Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve

- Horizontal automatic constant-angle bucket guidance - Vertical automatic constant-angle bucket guidance

- Automatic roll-back limiter to prevent material spillage - Kinematic assistance to hydraulic forces

- Constant boom momentum throughout the entire lift arc - Crowd force assistance

- Special liner material covering main wear areas inside and outside of bucket - Lip shrouds between teeth

- Wing shrouds on side walls - Heel shrouds at bottom edges

Special wear packages for highly abrasive materials on request

2 Cat 3512C (Tier 2)

6.7in

8.5in

3574cu in

Turbocharged and charge air-cooled

3435gal

Heavy-duty air filters

Microprocessed engine management

Hydraulically driven radiator fan with electronically controlled fan speed

Two-stage fuel filter including water separator

Additional high-capacity water separator

2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)

12

9800ft in

2 150 A

U.S. EPA flex

2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)

2240 kW 1,800 min-1 (3,000 hp 1,800 min-1)

Squirrel cage induction motor

2414hp

6.6 kV 10% (other on request)

194 A (at 6.6 kV)

50 Hz (60 Hz on request)

1500 min-1 (1,800 min-1 at 60 Hz)

350% of IN (197% of IN Optional)

24V

16 LED service lights

Battery isolation relays and switches

6 210 Ah - 12V each; 630 Ah - 24V in total

12 LED high-brightness working flood lights - 10 for working area - 2 for rear end

2 LED high-brightness access flood lights

Emergency stop switches accessible from ground level and in engine module

Retractable service station installed underneath the engine module and easily accessible from ground.