Caterpillar 740 GC Articulated Dump Truck

Units

Specifications

Engine

Displacement

926cu in

Bore

5.4in

Stroke

6.8in

Emissions

The C15 engine meets Tier 4 Final/Stage IV emission standards.

Net Power - Sae J1349

439hp

Gross Power - Sae J1995

452hp

Engine Model

Cat C15 ACERT

Net Power - Iso 14396

447hp

Note (1)

The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.

Note (2)

The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.

Note (3)

The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.

Note (4)

Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions.

Note (5)

DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.

Peak Engine Torque Gross (Sae J1995)

1711lb ft

Peak Engine Torque Speed

1200rpm

Engine Model - U.S. Epa Tier 4 Final/Eu Stage Iv

Cat C15 ACERT

Peak Engine Torque Net (Sae J1349)

1670lb ft

No Engine De-Rating Below

10000ft in

Transmission

Forward - 1

4mph

Forward - 2

5.3mph

Forward - 3

7.3mph

Forward - 4

9.2mph

Forward - 5

12.2mph

Forward - 6

14.9mph

Forward - 7

20.6mph

Reverse - 1

4.2mph

Reverse - 2

9.8mph

Steering

Lock To Lock

4.75 seconds @ 60 rpm

Transmission

Forward - 8

24.7mph

Forward - 9

35.7mph

Weights

Rated Payload

80000lb

Service Refill Capacities

Cooling System

23.7gal

Fuel Tank

145.3gal

Def Tank

6.5gal

Final Drive - Each

1.3gal

Engine Crankcase

13.7gal

Brake Cooling Tank

17.7gal

Steering/Hoist Hydraulic System

36.9gal

Transmission - Otg

19.8gal

Axles - Each

15.8gal

Standards

Cab - Fops

ISO 3449 Level II 2005

Cab - Rops

ISO 3471 2008

Brakes

ISO 3450 2011

Steering

ISO 5010 2007

Operating Weights

Front Axle - Empty

42596lb

Center Axle - Empty

14636lb

Rear Axle - Empty

14145lb

Total - Empty

71377lb

Front Axle - Rated Load

4687lb

Center Axle - Rated Load

37670lb

Rear Axle - Rated Load

37670lb

Total - Rated Load

80027lb

Front Axle - Loaded

49723lb

Center Axle - Loaded

51088lb

Rear Axle - Loaded

50594lb

Total - Loaded

151405lb

Sound Levels

Interior Cab

72 dB(A)

Note (1)

The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.

Note (2)

Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Turning Circle

Note

Dimensions are for machines equipped with 29.5 R25 tires.

Turning Dimensions - Sae Turning Radius

303in

Turning Dimensions - Clearance Radius

330in

Turning Dimensions - Inside Radius

156in

Turning Dimensions - Aisle Width

220in

Body Capacities

Heaped (Sae 2:1)

29.7yd3

Struck

22.2yd3

Tailgate Struck

23.4yd3

Tailgate Heaped Sae 2:1

31.9yd3

Body Hoist

Raise Time

12 s

Lower Time

12 s

Body Plate Thickness

Front Plate

0.3in

Base Plate

0.6in

Side Plates

0.5in

Body Plate

Body Plate Type

High strength Brinell HB450 wear resistant steel

Optimal Loader/Truck Pass Matching

Note

An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.