Caterpillar 980M Wheel Loader
Dimensions
Dimensions
Ground Clearance
1.42ft in
Length With Bucket On Ground
26.17ft in
Width Over Tires
10.83ft in
Height To Top Of Cab
10.25ft in
Wheelbase
12.5ft in
Dimensions - High Lift
Ground Clearance
1.42ft in
Hinge Pin Height At Maximum Lift
15.58ft in
Centerline Of Rear Axle To Edge Of Counterweight
8.17ft in
Centerline Of Rear Axle To Hitch
6.25ft in
Height - Top Of Exhaust Pipe
12.33ft in
Height - Top Of Hood
10.25ft in
Height - Top Of Rops
12.58ft in
Hinge Pin Height At Carry
2.25ft in
Note
All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
Lift Arm Clearance At Maximum Lift
13.08ft in
Maximum Width Over Tires
10.83ft in
Overall Length - Without Bucket
26.83ft in
Rack Back - Carry Height
48 degrees
Rack Back - Maximum Lift
61 degrees
Rack Back At Ground
39 degrees
Tread Width
8ft in
Wheel Base
12.5ft in
Dimensions - Standard Lift
Ground Clearance
1.42ft in
Maximum Width Over Tires
10.83ft in
Note
All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
Overall Length - Without Bucket
26.17ft in
Tread Width
8ft in
Height - Top Of Exhaust Pipe
12.33ft in
Height - Top Of Hood
10.25ft in
Rack Back - Carry Height
48 degrees
Height - Top Of Rops
12.58ft in
Centerline Of Rear Axle To Edge Of Counterweight
8.17ft in
Hinge Pin Height At Carry
2.08ft in
Rack Back - Maximum Lift
61 degrees
Hinge Pin Height At Maximum Lift
14.83ft in
Wheel Base
12.5ft in
Centerline Of Rear Axle To Hitch
6.25ft in
Lift Arm Clearance At Maximum Lift
12.42ft in
Rack Back At Ground
40 degrees
Specifications
Engine
Number Of Cylinders
6
Engine Make
2236
Engine Model
CAT C13 ACERT
Net Power
378hp
Gross Power
417hp
Max Torque
1617lb ft
Net Power - Iso 9249
386hp
Engine Model
Cat? C13 ACERT?
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Peak Gross Torque - 1,200 Rpm - Sae J1995
1627lb ft
Peak Gross Torque - 1,200 Rpm - Iso 14396
1609lb ft
Maximum Net Power - 1,700 Rpm - Iso 9249
386hp
Maximum Net Torque - 1,100 Rpm
1515lb ft
Maximum Power - 1,700 Rpm - Iso 14396
420hp
Maximum Power - 1,700 Rpm - Iso 14396 - Metric
426hp
Maximum Net Power - 1,700 Rpm - Iso 9249 - Metric
392hp
Maximum Net Power - 1,700 Rpm - Sae J1349
386hp
Maximum Net Power - 1,700 Rpm - Sae J1349 - Metric
392hp
Maximum Power - 1,700 Rpm - Sae J1995
425hp
Maximum Power - 1,700 Rpm - Sae J1995 - Metric
431hp
Maximum Net Torque - 1,000 Rpm
1505lb ft
Maximum Power - 1,800 Rpm - Iso 14396
406hp
Maximum Power - 1,800 Rpm - Iso 14396 - Metric
412hp
Maximum Power - 1,800 Rpm - Sae J1995
412hp
Maximum Power - 1,800 Rpm - Sae J1995 - Metric
417hp
Peak Gross Torque - 1,300 Rpm - Sae J1995
1617lb ft
Maximum Net Power - 1,800 Rpm - Iso 9249
373hp
Maximum Net Power - 1,800 Rpm - Sae J1349
373hp
Maximum Net Power - 1,800 Rpm - Iso 9249 - Metric
378hp
Maximum Net Power - 1,800 Rpm - Sae J1349 - Metric
378hp
Peak Gross Torque - 1,300 Rpm - Iso 14396
1602lb ft
U.S. Epa Tier 4 Final/Eu Stage Iv - Maximum Power - Sae J1995
425hp
Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent: Maximum Power - Sae J1995
412hp
Operational
Operating Weight
66337lb
Fuel Capacity
112.5gal
Hydraulic System Fluid Capacity
40gal
Cooling System Fluid Capacity
12gal
Transmission Fluid Capacity
20.3gal
Front Axle/Diff Fluid Capacity
22gal
Rear Axle/Diff Fluid Capacity
22gal
Transmission
Number Of Forward Gears
4
Number Of Reverse Gears
4
Max Speed - Forward
24.5mph
Max Speed - Reverse
24.5mph
Forward - 1
4.3mph
Forward - 2
8.3mph
Forward - 3
14.6mph
Forward - 4
24.5mph
Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm (37 in) roll radius.
Reverse - 1
4.8mph
Reverse - 2
9.4mph
Reverse - 3
16.7mph
Reverse - 4
24.5mph
Weights
Operating Weight
66337lb
Note
Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles, secondary steering, sound suppression, and a 5.4 m3 (7.1 yd3) GP bucket with BOCE.
Note (1)
For 5.4 m3 (7.1 yd3) general purpose buckets with BOCE.
Note (2)
Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m3 (7.1 yd3) general purpose bucket with BOCE.
Buckets
Bucket Capacities
4.2-12.2 m3 (5.25-16.0 yd3)
Hydraulic System
Relief Valve Setting
4975psi
Pump Flow Capacity
119gal/min
Axles
Front
Fixed
Rear
Oscillating ?13 degrees
Maximum Single-Wheel Rise And Fall
22.5in
Hydraulic System
Hydraulic Cycle Time - Total
10.1 s
Implement System - Maximum Operating Pressure
4975 psi
Implement Pump Type
Variable Displacement Piston
Implement System - Maximum Pump Output At 2,250 Rpm
119 gal/min
Implement System - Optional 3rd Function Maximum Flow
63 gal/min
Implement System - Optional 3rd Function Maximum Pressure
3159 psi
Hydraulic Cycle Time - Rated Payload - Raise From Carry Position
5.3 s
Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise
1.7 s
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down
3.1 s
Hydraulic Cycle Time - Rated Payload - Total
10.1 s
Brakes
Brakes
Brakes meet ISO 3450:2011 standards
Operating Specifications
Note (1)
For a machine configuration as defined under ?Weight.?
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6.
Note
Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Breakout Force
50357lb
Static Tipping Load - Full 40 Degrees Turn - With Tire Deflection
43133lb
Static Tipping Load - Full 40 Degrees Turn - No Tire Deflection
45847lb
Service Refill Capacities
Cooling System
14gal
Fuel Tank
112.5gal
Crankcase
9.8gal
Def Tank
5.5gal
Hydraulic Tank
40gal
Transmission
20.3gal
Differential - Final Drives - Front
22gal
Differential - Final Drives - Rear
22gal
Sound
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)
**For machines in European Union countries and in countries that adopt the ?EU Directives.?
Note (3)
***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)
75 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008)
112 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013)
78 dB(A)*
With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)**
72 dB(A)
With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)**
109 LWA***
Cab
Rops/Fops
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Bucket Capacities
Bucket Range
4.2-12.2 m (5.25-16.0 yd)
Engine - Tier 3/Stage Iiia Equivalent
Emissions
Tier 3/Stage IIIA
Engine - Tier 4 Final/Stage Iv
Emissions
Cat engine with ACERT Technology ? meets Tier 4 Final/Stage IV emission standards.
Engine Model
Cat C13 ACERT
Maximum Net Power - 1,700 Rpm - Sae J1349
386hp
Peak Gross Torque - 1,200 Rpm - Sae J1995
1627lb ft
Bore
5.2in
Stroke
6.2in
Displacement
763cu in
Note (1)
The power ratings apply at the stated speed when tested under the reference conditions for the specified standards.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment.
Note (3)
The gross power advertised is with the fan at maximum speed.
Maximum Net Torque - 1,100 Rpm - Sae J1349
1515lb ft
Maximum Power - 1,700 Rpm - Sae J1995
425hp
Engine - Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent
Engine Model
Cat C13 ACERT
Maximum Power - 1,800 Rpm - Sae J1995
417hp
Maximum Net Power - 1,800 Rpm - Sae J1349
373hp
Peak Gross Torque - 1,300 Rpm - Sae J1995
1617lb ft
Maximum Net Torque - 1,000 Rpm - Sae J1349
1505lb ft
Bore
5.2in
Stroke
6.2in
Displacement
763cu in
Emissions
Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards.
Sound - Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent
Operator Sound Pressure Level - Iso 6396:2008
75 dB(A)
Exterior Sound Power Level - Iso 6395:2008*
112 dB(A)
Exterior Sound Pressure Level - Sae J88:2013**
78 dB(A)
Note (1)
The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.
Note (2)
*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Note (3)
**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.
Sound - Tier 4 Final/Stage Iv
Note (1)
The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level - Iso 6396:2008
72 dB(A)
Exterior Sound Power Level - Iso 6395:2008*
112 dB(A)
Exterior Sound Pressure Level - Sae J88:2013**
78 dB(A)
Note (2)
*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Note (3)
**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.
