Caterpillar 982M Wheel Loader
Dimensions
Dimensions - Standard Lift
Ground Clearance
1.33ft in
Centerline Of Rear Axle To Edge Of Counterweight
8.92ft in
Centerline Of Rear Axle To Hitch
6.25ft in
Height - Top Of Exhaust Pipe
12.25ft in
Height - Top Of Hood
10.17ft in
Height - Top Of Rops
12.5ft in
Hinge Pin Height At Carry
2.67ft in
Hinge Pin Height At Maximum Lift
15.5ft in
Lift Arm Clearance At Maximum Lift
12.67ft in
Maximum Width Over Tires
11.5ft in
Overall Length - Without Bucket
28.17ft in
Rack Back - Carry Height
48 degrees
Rack Back - Maximum Lift
57 degrees
Rack Back At Ground
42 degrees
Tread Width
8.33ft in
Note
All dimensions are approximate and based on Bridgestone 875/65R29 VLTS L4 radial tires.
Wheel Base
12.5ft in
Specifications
Engine
Displacement
763cu in
Net Power - Iso 9249
398hp
Engine Model
Cat C13 ACERT
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
Peak Gross Torque - 1,200 Rpm - Sae J1995
1627lb ft
Peak Gross Torque - 1,200 Rpm - Iso 14396
1609lb ft
Maximum Net Power - 1,700 Rpm - Iso 9249
398hp
Maximum Net Torque - 1,100 Rpm
1518lb ft
Maximum Power - 1,700 Rpm - Iso 14396
430hp
Maximum Power - 1,700 Rpm - Iso 14396 - Metric
436hp
Maximum Net Power - 1,700 Rpm - Iso 9249 - Metric
404hp
Maximum Net Power - 1,700 Rpm - Sae J1349
398hp
Maximum Net Power - 1,700 Rpm - Sae J1349 - Metric
404hp
Maximum Power - 1,700 Rpm - Sae J1995
436hp
Maximum Power - 1,700 Rpm - Sae J1995 - Metric
442hp
Maximum Net Torque - 1,000 Rpm
1505lb ft
Maximum Power - 1,800 Rpm - Iso 14396
406hp
Maximum Power - 1,800 Rpm - Iso 14396 - Metric
412hp
Maximum Power - 1,800 Rpm - Sae J1995
412hp
Maximum Power - 1,800 Rpm - Sae J1995 - Metric
417hp
Peak Gross Torque - 1,300 Rpm - Sae J1995
1617lb ft
Maximum Net Power - 1,800 Rpm - Iso 9249
373hp
Maximum Net Power - 1,800 Rpm - Sae J1349
373hp
Maximum Net Power - 1,800 Rpm - Iso 9249 - Metric
378hp
Maximum Net Power - 1,800 Rpm - Sae J1349 - Metric
378hp
Peak Gross Torque - 1,300 Rpm - Iso 14396
1602lb ft
U.S. Epa Tier 4 Final/Eu Stage Iv - Maximum Power - Sae J1995
436hp
Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent: Maximum Power - Sae J1995
436hp
Operational
Operating Weight
78402lb
Transmission
Forward - 1
3.9mph
Forward - 2
7.4mph
Forward - 3
13.1mph
Forward - 4
23.3mph
Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
Reverse - 1
4.3mph
Reverse - 2
8.5mph
Reverse - 3
15mph
Reverse - 4
24.5mph
Weights
Operating Weight
78402lb
Note
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles, secondary steering, sound suppression, and a 6.1 m3 (8.0 yd3) GP bucket with BOCE.
Note (1)
For 6.1 m3 (8.0 yd3) general purpose buckets with BOCE.
Note (2)
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m3 (8.0 yd3) general purpose bucket with BOCE.
Buckets
Bucket Capacities
4.6-12.0 m (6.0-15.75 yd)
Axles
Front
Fixed
Rear
Oscillating ?13 degrees
Maximum Single-Wheel Rise And Fall
22.5in
Hydraulic System
Hydraulic Cycle Time - Total
10.1 s
Implement System - Maximum Operating Pressure
4975 psi
Implement Pump Type
Variable Displacement Piston
Implement System - Maximum Pump Output At 2,250 Rpm
119 gal/min
Implement System - Optional 3rd Function Maximum Flow
63 gal/min
Implement System - Optional 3rd Function Maximum Pressure
3159 psi
Hydraulic Cycle Time - Rated Payload - Raise From Carry Position
5.3 s
Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise
1.7 s
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down
3.1 s
Hydraulic Cycle Time - Rated Payload - Total
10.1 s
Brakes
Brakes
Brakes meet ISO 3450:2011 standards
Operating Specifications
Note (1)
For a machine configuration as defined under "Weight."
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6.
Note
Full compliance to ISO (2007) 143971 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Breakout Force
58450lb
Static Tipping Load - Full 40 Degrees Turn - With Tire Deflection
46473lb
Static Tipping Load - Full 40 Degrees Turn - No Tire Deflection
49368lb
Service Refill Capacities
Cooling System
14gal
Fuel Tank
112.5gal
Crankcase
9.8gal
Def Tank
5.5gal
Hydraulic Tank
48gal
Transmission
20.3gal
Differential - Final Drives - Front
24.3gal
Differential - Final Drives - Rear
24.3gal
Sound
Note (1)
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
Note (2)
**For machines in European Union countries and in countries that adopt the "EU Directives."
Note (3)
***European Union Directive "2000/14/EC" as amended by "2005/88/EC."
Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)
72 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008)
112 dB(A)
With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013)
78 dB(A)*
With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)**
72 dB(A)
With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)**
109 LWA***
Cab
Rops/Fops
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Bucket Capacities
Bucket Range
4.6-12.0 m (6.0-15.75 yd)
Engine - Tier 3/Stage Iiia Equivalent
Emissions
Tier 3/Stage IIIA
Engine - Tier 4 Final/Stage Iv
Emissions
Tier 4/Stage IV
Engine Model
Cat C13 ACERT
Maximum Net Power - 1,700 Rpm - Sae J1349
398hp
Peak Gross Torque - 1,200 Rpm - Sae J1995
1627lb ft
Bore
5.2in
Stroke
6.2in
Displacement
763cu in
Note (1)
The power ratings apply at the stated speed when tested under the reference conditions for the specified standards.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and aftertreatment.
Note (3)
The gross power advertised is with the fan at maximum speed.
Maximum Net Torque - 1,100 Rpm - Sae J1349
1518lb ft
Maximum Power - 1,700 Rpm - Sae J1995
436hp
Engine - Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent
Engine Model
Cat C13 ACERT
Maximum Power - 1,800 Rpm - Sae J1995
412hp
Maximum Net Power - 1,800 Rpm - Sae J1349
373hp
Peak Gross Torque - 1,300 Rpm - Sae J1995
1617lb ft
Maximum Net Torque - 1,000 Rpm - Sae J1349
1505lb ft
Bore
5.2in
Stroke
6.2in
Displacement
763cu in
Emissions
Cat engine with ACERT Technology ? meets Tier 2/Stage II, Tier 3/Stage IIIA equivalent emission standards.
Sound - Tier 2/Stage Ii, Tier 3/Stage Iiia Equivalent
Operator Sound Pressure Level - Iso 6396:2008
75 dB(A)
Exterior Sound Power Level - Iso 6395:2008*
112 dB(A)
Exterior Sound Pressure Level - Sae J88:2013**
78 dB(A)
Note (1)
The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.
Note (2)
*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Note (3)
**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.
Sound - Tier 4 Final/Stage Iv
Note (1)
The sound values indicated are for specific operating conditions only. Machine and operator sound levels will vary at different engine and/or cooling fan speeds. Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained, or when the doors and/or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level - Iso 6396:2008
72 dB(A)
Exterior Sound Power Level - Iso 6395:2008*
112 dB(A)
Exterior Sound Pressure Level - Sae J88:2013**
78 dB(A)
Note (2)
*For a standard machine configuration, measured according to the procedures specified with the cooling fan speed set at maximum value.
Note (3)
**For a standard machine configuration, measured according to the procedures specified. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft), moving forward in second gear ratio with the cooling fan speed set at maximum value.
