Caterpillar 992K Wheel Loader
Dimensions
Bucket
Dump Clearance At Max Raise
15.12ft in
Bucket Capacity - Heaped
16yd3
Bucket Capacity - Struck
14yd3
Breakout Force
128895lb
Bucket Width
15.83ft in
Dimensions
Ground Clearance
2.25ft in
Length With Bucket On Ground
51.63ft in
Width Over Tires
18.05ft in
Height To Top Of Cab
18.63ft in
Wheelbase
19.32ft in
Reach At Max Lift And Dump
7.64ft in
Dimensions*
Ground Clearance
2.25ft in
Bumper Clearance
3.86ft in
Height - Top Of Rops/Fops
18.63ft in
Wheel Base Length
19.32ft in
Height - Top Of Hood
17.22ft in
Specifications
Engine
Number Of Cylinders
12
Engine Make
2236
Engine Model
C32 ACERT
Net Power
801hp
Gross Power
904hp
Power Measured @
1750rpm
Displacement
8.5cu in
Bore
5.7in
Stroke
6.4in
Emissions
U.S. EPA Tier 4 Final
Gross Power - Sae J1995
904hp
Engine Model
Cat C32 with ACERT Technology
Gross Power***
900hp
Net Power***
814hp
Emissions (U.S. Epa Tier 4 Final): Gross Power - Sae J1995
900hp
Emissions (Tier 2 Equivalent): Net Power - Sae J1349
814hp
Emissions (U.S. Epa Tier 4 Final): Net Power - Sae J1995
814hp
Emissions (U.S. Epa Tier 4 Final): Peak Torque At 1,200 Rpm - Sae J1995
4765rpm
Emissions (Tier 2 Equivalent): Gross Power - Sae J1995
907hp
Emissions (Tier 2 Equivalent): Gross Power - Iso 14396
884hp
Emissions (Tier 2 Equivalent): Rated Speed
1750rpm
Emissions (Tier 2 Equivalent): Net Power - Sae J1995
814hp
Emissions (Tier 2 Equivalent): Peak Torque At 1,200 Rpm - Sae J1995
4796rpm
Note (Tier 4 Final) (1)
These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 4 Final) (2)
Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Note (Tier 2 Equivalent) (1)
These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 2 Equivalent) (2)
Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Emissions (U.S. Epa Tier 4 Final): Net Power - Sae J1349
814hp
Emissions (U.S. Epa Tier 4 Final): Gross Power - Iso 14396
884hp
Emissions (U.S. Epa Tier 4 Final): Rated Speed
1750rpm
Operational
Operating Weight
214948lb
Fuel Capacity
413gal
Engine Oil Fluid Capacity
32gal
Cooling System Fluid Capacity
77gal
Transmission Fluid Capacity
45gal
Front Axle/Diff Fluid Capacity
95gal
Rear Axle/Diff Fluid Capacity
91gal
Static Tipping Weight
113449.9lb
Operating Voltage
24V
Alternator Supplied Amperage
150amps
Tire Size
45/65 45
Transmission
Transmission Type
Cat Planetary Power Shift
Transmission Type
Planetary, powershift
Number Of Forward Gears
3
Number Of Reverse Gears
3
Max Speed - Forward
12.8mph
Max Speed - Reverse
13.9mph
Forward - 1
4.3mph
Forward - 2
7.4mph
Forward - 3
12.6mph
Reverse - 1
4.7mph
Reverse - 2
8.1mph
Direct Drive - Forward 3
14.2mph
Direct Drive - Reverse 3
15.4mph
Direct Drive - Forward 2
8mph
Direct Drive - Reverse 2
8.8mph
Converter Drive - Forward 3
12.8mph
Converter Drive - Reverse 3
13.9mph
Direct Drive - Forward 1
Lock-up Disabled
Converter Drive - Forward 1
4.4mph
Converter Drive - Forward 2
7.6mph
Direct Drive - Reverse 1
4.9mph
Converter Drive - Reverse 1
4.6mph
Converter Drive - Reverse 2
8.1mph
Reverse - 3
13.8mph
Tires
Tires
Choose from a variety of tires to match your application.
Weights
Operating Weight - Standard Lift*
220089lb
Operating Weight - High Lift**
221847lb
Operating Weight - Standard Lift
214948lb
Operating Weight - High Lift
226249lb
Buckets
Bucket Capacities
10.7-12.3 m3 (14-16 yd3)
Hydraulic System
Relief Valve Setting
4500psi
Axles
Front
Fixed
Rear
Oscillating
Oscillation Angle
10 degrees , 8 degrees with Stops
Brakes
Brakes
Meets SAE J1473, OCT90 and ISO 3450:1992
Operating Specifications
Bucket Capacity Range
10.7-12.3 m3 (14-16 yd3)
Breakout Force
128895lb
Rated Payload - High Lift
42000lb
Rated Payload - Standard Lift
48000lb
Operating Weight - Standard Lift*
220089lb
Operating Weight - High Lift**
221847lb
Operating Weight - Standard
220089lb
Operating Weight - High Lift
226249lb
Rated Payload - Standard (Face Material)
52910.9lb
Rated Payload - High Lift (Face Material)
46297.1lb
Operating Weight - Standard Lift
214948lb
Service Refill Capacities
Cooling System
77gal
Fuel Tank
413gal
Crankcase
32gal
Fuel Tank - Standard
413gal
Engine Crankcase
32gal
Transmission
45gal
Differential - Final Drives - Front
95gal
Differential - Final Drives - Rear
91gal
Cooling Systems
77gal
Hydraulic Tank - Implement
86gal
Hydraulic Tank - Steering/Brake
42gal
Windshield Washer Fluid
4.9gal
Hydraulic System - Implement
86gal
Hydraulic System - Steering
42gal
Ac Refrigerant
6lb
Ac Oil
0.1gal
Hydraulic Cycle Times
Raise
9.4 s
Dump
1.8 s
Lower Float Down
3.7 s
Rack Back
4.4 s
Total Hydraulic Cycle Time
14.9 s
Lower Float Down - Empty
3.7 s
Raise*
9.4 s
Dump*
1.8 s
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive Flow Control
Lift/Tilt System - Pump
Variable Displacement Piston
Relief Valve Setting - Lift/Tilt
4500 psi
Tilt Cylinder - Stroke
80.9in
Lift Cylinder - Bore
11in
Lift Cylinder - Stroke
45.2in
Tilt Cylinder - Bore
10.5in
Maximum Flow At 1,850 Rpm
254 gal/min
Hydraulic System - Steering
Steering System - Circuit
Pilot, Load Sensing
Steering System - Pump
Piston, Variable Displacement
Steering Cut Off Pressure
4500 psi
Steering Cycle Times - Low Idle
6.4 s
Steering Cycle Times - High Idle
4.4 s
Maximum Flow At 1,350 Rpm
95 gal/min
Cab
Cab - Rops/Fops
Meets SAE and ISO standards.
Rops/Fops
Meets SAE and ISO standards
Loader Hydraulic System
Relief Valve Setting
4500 psi
Relief Valve Setting - Low Idle
4500 psi
Lift Cylinder, Double Acting - Bore
11in
Tilt Cylinder, Double Acting - Bore
10.5in
Lift Cylinder, Double Acting - Stroke
45.2in
Tilt Cylinder, Double Acting - Stroke
80.9in
Model
Serial Number Prefix
880
Operating Specifications - High Lift*
Breakout Force
127813lb
Static Tipping Load - At 35 Degrees Articulation
114760lb
Operating Specifications - Standard Lift*
Breakout Force
123439lb
Static Tipping Load - At 35 Degrees Articulation
122010lb
Sound Performance
Performance
Performance
Operator Sound Pressure Level
The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing Protection
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level - Standard Machine Configuration
The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Machine Sound Power Level - Sound Suppressed Machine Configuration
The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Dimensions - High Lift - Approximate
Ground To Top Of Rops
18.7ft in
Ground To Top Of Exhaust Stacks
17.3ft in
Ground To Top Of Hood
13.3ft in
Ground To Bumper Clearance
3.9ft in
Rear Axle - Centerline To Bumper
13.8ft in
Wheel Base
19.4ft in
Maximum Overall Length
52.9ft in
Ground To Lower Hitch Clearance
2.3ft in
Ground To Center Of Axles
4.5ft in
Rack Back Angle - Ground Level
42.8 degrees
Rack Back Angle - Carry
52.5 degrees
B-Pin Height - Maximum Lift
24.6ft in
Maximum Overall Height - Bucket Raised
33.1ft in
Dump Angle At Maximum Lift
50 degrees
Reach - Maximum Lift
6.9ft in
Tread Width
10.9ft in
Clearance At 45 Degrees Dump (Tooth Tip)
15.1ft in
Rack Back Angle - Maximum Lift
65 degrees
Dimensions - Standard Lift - Approximate
Ground To Top Of Rops
18.7ft in
Ground To Top Of Exhaust Stacks
17.3ft in
Ground To Top Of Hood
13.3ft in
Ground To Bumper Clearance
3.9ft in
Rear Axle - Centerline To Bumper
13.8ft in
Wheel Base
19.4ft in
Maximum Overall Length
52ft in
Ground To Lower Hitch Clearance
2.3ft in
Ground To Center Of Axles
4.5ft in
Rack Back Angle - Ground Level
43.4 degrees
Rack Back Angle - Carry
52.7 degrees
B-Pin Height - Maximum Lift
22.8ft in
Maximum Overall Height - Bucket Raised
30.5ft in
Dump Angle At Maximum Lift
50 degrees
Reach - Maximum Lift
7ft in
Tread Width
10.9ft in
Clearance At 50 Degrees Dump (Tooth Tip)
14.7ft in
Rack Back Angle - Maximum Lift
65 degrees
Operating Specifications - High Lift
Static Tipping Load - At 35 Degrees Articulation
96853lb
Breakout Force
129777lb
Operating Specifications - Standard Lift
Static Tipping Load - At 35 Degrees Articulation
113159lb
Standard Lift Breakout Force
128895lb
High Lift Breakout Force
127775lb
Breakout Force
128895lb
