Caterpillar D6 Crawler Tractor
Dimensions
Dimensions
Ground Clearance
1.19ft in
Track Gauge
6.34ft in
Width Across End Bits
10.8ft in
Width Of Standard Track Shoe
24in
Length - Track On Ground
116.7in
Operating Weight
48500 lb
Width Over Trunnions
106in
Length Of Machine
186.2in
Ground Pressure
7.9 psi
Height
10.41ft in
Dimensions - Lgp
Ground Clearance
361in
Width Across End Bits
11ft in
Operating Weight
48611lb
Width Of Standard Track Shoe
30in
Ground Pressure
6.6 psi
Length - Track On Ground
116.7in
Length Of Machine
224.4in
Width Over Trunnions
118.1in
Dimensions - Lgp (30-In)
Length Of Track On Ground
117in
Ground Clearance
14.2in
Track Gauge
82in
Width Across End Bits
11.8ft in
Width Over Trunnions
118in
Ground Pressure
6.6 psi
Length Of Machine
186.2in
Width Of Standard Track Shoe
30in
Machine Height
124.9in
Operating Weight
50130lb
Dimensions – Lgp (36-In)
Length Of Track On Ground
127.8in
Ground Clearance
16.2in
Track Gauge
90in
Ground Pressure
5.1 psi
Width Over Trunnions
137.4in
Width Across End Bits
153.6in
Machine Height
125.1in
Length Of Machine
126.9in
Width Of Standard Track Shoe
36in
Dimensions - Lgp Vpat
Ground Clearance
14.2in
Width Across End Bits, Angled
12ft in
Length Of Machine
233.6in
Width Of Standard Track Shoe
30in
Length - Track On Ground
132in
Width Across End Bits
13ft in
Ground Pressure
6 psi
Operating Weight
51122lb
Dimensions – Lgp Vpat (30-In)
Length Of Track On Ground
132.1in
Ground Clearance
15.4in
Track Gauge
90in
Width Across End Bits
13.2ft in
Machine Height
126.9in
Operating Weight
50650lb
Length Of Machine
202.1in
Ground Pressure
5.8 psi
Width Of Standard Track Shoe
30in
Dimensions – Lgp Vpat (36-In)
Length Of Track On Ground
132.1in
Ground Clearance
15.1in
Track Gauge
94in
Length Of Machine
202.1in
Ground Pressure
5 psi
Machine Height
126.9in
Width Of Standard Track Shoe
36in
Operating Weight
51875lb
Width Across End Bits
14.3ft in
Dimensions - Lgp Vpat (Wide Gauge)
Length Of Track On Ground
132in
Ground Clearance
14.2in
Track Gauge
94in
Width Across End Bits, Angled
13ft in
Width Across End Bits
14ft in
Ground Pressure
5 psi
Operating Weight
52526lb
Machine Height
125in
Length Of Machine
233.6in
Width Of Standard Track Shoe
36in
Dimensions - Lgp (Wide Gauge)
Length Of Track On Ground
128in
Ground Clearance
14.2in
Track Gauge
90in
Machine Height
125.1in
Width Of Standard Track Shoe
36in
Operating Weight
51441lb
Width Across End Bits
13ft in
Length Of Machine
224.4in
Width Over Trunnions
137.4in
Ground Pressure
5.1 psi
Dimensions - Vpat
Length Of Track On Ground
127.8in
Ground Clearance
16.61in
Track Gauge
82in
Width Of Standard Track Shoe
24in
Width Across End Bits, Angled
11ft in
Ground Pressure
7.1 psi
Length Of Machine
202.1in
Operating Weight
49030lb
Machine Height
126.9in
Width Across End Bits
12ft in
Specifications
Engine
Emissions
U.S. EPA Tier 4 Final, EU Stage V, Korea Tier 4 Final
Engine Model
Cat C9.3B
Note (1)
All non-road Tier 4 Interim and Final, Stage IIIB, IV and V, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec,
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (3)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.
Net Power - Rated - Iso 9249/Sae J1349
215hp
Net Power - Rated - Iso 9249/Sae J1349 (Din)
219hp
Build Number
20A
Service Refill Capacities
Fuel Tank
90gal
Def Tank
7.4gal
Hydraulic Controls - Pressures
Relief Pressures
NaN
Blades - Capacity
Lgp Vpat - Blade
5.8yd3
Su
7.4yd3
Lgp Su
7.5yd3
Vpat
5.4yd3
Lgp Vpat (Wide Gauge)
6.4yd3
Blades - Width
Lgp S-Blade
5yd3
Lgp Vpat - Blade
5.8yd3
Su
10.9ft in
Lgp Su
7.5yd3
Vpat
5.4yd3
Lgp Vpat (Wide Gauge)
6.4yd3
