Caterpillar TL642D with Stabilizers Telescopic Forklift
Specifications
Engine
Engine Model
Cat C3.4B
Note
Meets U.S. EPA Tier 4 Final emission standards.
Gross Power - Basic
100hp
Operational
Operating Weight
22928lb
Tires
Standard
370/75-28 Air Duraforce
Optional (4)
13.00 24 Solid
Optional (2)
13.00 24-16 PR Air
Optional (3)
13.00 24-12 PR Foam Filled
Optional (1)
370/75-28 Foam Duraforce
Hydraulic System
Auxiliary Hydraulic Flow
18 gal/min
Note
Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
Auxiliary Hydraulic Pressure
3481 psi
System Operating Pressure
3770 psi
Axles
Type (2)
High bias limited slip differential on front axle
Type (1)
Trunnion mounted planetary 55 degree steer axles
Hydraulic System
Gear Pump
Single-section
Brakes
Service Brakes
Inboard wet disc brakes on front and rear axles
Parking Brakes
Wet disc, spring applied hydraulic release on front axle
Operating Specifications
Rated Load Capacity
6500lb
Maximum Lift Height
42ft in
Maximum Forward Reach
30ft in
Top Travel Speed
20mph
Capacity At Maximum Height (O/R Down)
6500lb
Capacity At Maximum Reach (O/R Down)
1700lb
Frame Leveling
10 degrees
Turning Radius - Over Tires
12ft in
Drawbar Pull - Loaded
19783lb ft
Capacity At Maximum Height (O/R Up)
6000lb
Capacity At Maximum Reach (O/R Up)
600lb
Service Refill Capacities
Fuel Tank
38.3gal
Hydraulic System
42gal
Diesel Exhaust Fluid (Def) Tank
5.7gal
Boom Performance
Boom Up
15.5 s
Boom Down
10.7 s
Tele In
11.8 s
Tele Out
17 s
Transmission Speeds
Forward
4 speed
Reverse
3 speed
Work Tools
Hydraulic It Coupler
Includes Auxiliary Electrics
Pallet Forks - Option 1
[2] 1220 mm, 60 mm 125 mm ([2] 48 in, 2.36 in 5 in)
Pallet Forks - Option 2
[2] 1220 mm, 60 mm 100 mm ([2] 48 in, 2.36 in 4 in)
Lumber Forks - Option 1
[2] 1525 mm, 45 mm 180 mm ([2] 60 in, 1.75 in 7 in)
Lumber Forks - Option 2
[2] 1829 mm, 50 mm 150 mm ([2] 72 in, 2 in 6 in)
Cubing Forks
[2] 1220 mm, 50 mm 50 mm ([2] 48 in, 2 in 2 in)
Carriages - Standard Tilt
50in
Carriages - Wide Tilt
72in
Carriages - Side Shift
48in
Carriages - Standard Rotate
50in
Carriages - Wide Rotate
72in
Carriages - Swing
100 degrees, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100 degrees, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Pallet Forks - Option 3
[2] 1525 mm, 60 mm 150 mm ([2] 60 in, 2.36 in 6 in)
Carriages - Dual Fork Positioning
50in
