John Deere 2038R Utility Tractor
Dimensions
Dimensions
Wheelbase
67.91ft in
Shipping Weight
1105 kg
Turning Radius With Brakes
2.75 m
Turning Radius Without Brakes
9.85ft in
Specifications
Engine
Number Of Cylinders
3
Rated Engine Speed
2500 rpm
Engine Model
3TNV88C-NJT
Engine Manufacturer
Yanmar
Family
GYDXL1.57TDA
Power Take-Off (Pto) Power
30.4 hp
Engine Type
Direct Injection
Injection Pump Type
Direct Injection
Emissions Compliance
Final Tier 4
Cylinder Liners
Cast-In-Block
Compression Ratio
19.1:1
Gross Power
36.8hp
Lubrication
Pressurized
Cooling System
Water pump
Air Cleaner
Dual element
Engine Torque At Rated Speed
101.4 Nm
Displacement
95.7cu in
Aspiration
Turbocharged
Fuel Tank Capacity
8.5gal
Bore
3.4in
Stroke
3.6in
Fluid Capacities
Crankcase With Filter
4.5 L
Electrical
Battery Size
500 CCA
Alternator (12-V)
85 amp
Starter Size
1.9 hp
Fuel System
Fuel System Type
Direct Injection
Power Take-Off(Pto)
Standard
Rear - 540 rpm, Mid - 2000 rpm
Control
Independent
Clutch
Independent
Brake (For Mid And Rear Pto)
Wet disc
Transmission
Cruise Control
Standard
Standard Transmission; Forward/Reverse
Hydrostatic transmission (HST)
Brakes
Wet disc
Steering
Power steering
Axle Capacity
Front - 880 kg, Rear - 1089 kg
Creeper
No
Differential Lock
Yes
Final Drive Type
Bull Gear
Tires
Front
R1 Ag 7.00-12, R3 Turf 23x8.50-14, R4 Industrial 23x8.50-14, R3 Turf Radial 200/60 R15
Rear
R1 Ag 12.4-16 R3 Turf 14-17.5, R4 Industrial 14-17.5, R3 Turf Radial 300/70 R20
Hydraulic
Maximum Operating Pressure
2500psi
Draft Control Sensing
Position control
Remote Control Valves Available
Up to three
Pump Rated Output
Steering - 15 L/min, Implement - 20.2 L/min
Pump Type
Gear
Hydraulic Type
Open Center
Final Drive
Final Drive Type
Spur Gear
Differential Lock
Yes
3-Point Hitch
Category
Category 1
Lift Capacity, 24-In. Behind Link Arms
615 kg
Operator Station
Rollover Protective Structure
Foldable, ASABE S478
Platform - Flat/Straddle
Flat
Gear Shift Location - Console/Floor
Left Hand Side
