Caterpillar 262D Skid Steer Loader
Dimensions
Dimensions
Length With Bucket
12.19ft in
Ground Clearance
8.9in
Height To Top Of Cab
6.93ft in
Wheelbase
4.1ft in
Length W/O Bucket
9.83ft in
Clearance At Max Lift And Dump
7.81ft in
Reach At Max Lift And Dump
30.95in
Clearance At Maximum Lift And Dump
93.7in
Departure Angle
26 degrees
Bucket Pin Height - Carry Position
7.9in
Height - Top Of Cab
6.93ft in
Hinge Pin Height - Fully Raised
124.89in
Length - With Bucket On Ground
146.2in
Length - Without Bucket
117.9in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Maximum Dump Angle
51 degrees
Maximum Overall Height
157.81in
Maximum Reach - With Arms Parallel
50.9in
Rack Back Angle - Maximum Height
84 degrees
Bucket Pin Height - Maximum Lift
10.41ft in
Bucket Pin Reach - Maximum Lift
15.5in
Bumper Overhang - Rear Axle
42.6in
Turn Radius From Center - Rear
71.1in
Turning Radius From Center - Inc Bucket
85.87in
Turning Radius From Center - Machine Rear
71.07in
Vehicle Width Over Tires
66in
Wheel Base
4.1ft in
Reach - Maximum Lift/Dump
30.9in
Turn Radius From Center - Bucket
85.9in
Turn Radius From Center - Coupler
55.2in
Operating Specifications
Rated Operating Capacity
2700lb
Rated Operating Capacity With Optional Counterweight
2950lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Breakout Force - Tilt Cylinder
7355lb
Tipping Load
5400lb
Specifications
Engine
Engine Model
Cat C3.3B DIT (turbo)
Gross Power
74.3hp
Net Power
72.9hp
Max Torque
195.5lb ft
Torque Measured @
1500rpm
Displacement
203cu in
Bore
3.7in
Stroke
4.7in
Gross Power - Sae J1995
74.3hp
Engine Model
Cat C3.3B DIT (Turbo)
Net Power - Iso 9249 Eec
73.7hp
Net Power - Sae 1349
72.9hp
Net Flywheel Power
72.9hp
Operational
Operational Weight
8011.6lb
Fuel Capacity
24.9gal
Cooling System Fluid Capacity
3.7gal
Hydraulic System Fluid Capacity
13.8gal
Max Speed
7.7mph
Chain Box Fluid Capacity - Each Side
3.4gal
Tire Size
12 × 16.5
Operating Voltage
12V
Alternator Supplied Amperage
80amps
Power Train
Travel Speed Forward
7.7mph
Travel Speed Reverse
7.7mph
Travel Speed Reverse - 2-Speed Option
11mph
Travel Speed Forward - 2-Speed Option
11mph
Weights
Operating Weight
8011lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Hydraulic
Pump Flow Capacity
32gal/min
Hydraulic System
Hydraulic Flow (1)
Standard
Hydraulic Flow (2)
High Flow XPS
Loader Hydraulic Flow (1)
23 gal/min
Loader Hydraulic Flow (2)
32 gal/min
Loader Hydraulic Pressure (1)
3335 psi
Hydraulic Power - Calculated (1)
44hp
Loader Hydraulic Pressure (2)
4061 psi
Hydraulic Power - Calculated (2)
76hp
Service Refill Capacities
Cooling System
3.7gal
Fuel Tank
24.8gal
Hydraulic Tank
10.3gal
Engine Crankcase
3gal
Hydraulic System
13.7gal
Chain Box - Each Side
3.3gal
Cab
Rops
ISO 3471:2008
Fops
ISO 3449:2005 Level I
Fops Level Ii
ISO 3449:2005 Level II
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Noise Level
Inside Cab*
81 dB(A)
Outside Cab**
101 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
