Caterpillar 277D Multi Terrain Loader
Dimensions
Dimensions
Ground Clearance
0.75ft in
Bucket Pin Height - Carry Position
8in
Bucket Pin Height - Maximum Lift
10.42ft in
Clearance At Maximum Lift And Dump
97.9in
Departure Angle
38 degrees
Height - Top Of Cab
6.94ft in
Length - Track On Ground
71.1in
Length - With Bucket On Ground
146.2in
Length - Without Bucket
117.9in
Maximum Dump Angle
39 degrees
Maximum Overall Height
159.5in
Maximum Reach - With Arms Parallel To Ground
54.9in
Overall Length - Track
90in
Rack Back Angle - Maximum Height
94 degrees
Reach - Maximum Lift/Dump
23.5in
Turning Radius From Center - Bucket
92in
Turning Radius From Center - Coupler
58.8in
Turning Radius From Center - Machine Rear
67.41in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Vehicle Width
78in
Specifications
Engine
Gross Power
74.3hp
Net Power
72.9hp
Displacement
203cu in
Bore
3.7in
Stroke
4.7in
Net Power - Iso 9249
73.7hp
Gross Power - Sae J1995
74.3hp
Engine Model
Cat C3.3B DIT (turbo)
Net Power - Sae 1349
72.9hp
Peak Torque - 1,500 Rpm - Sae J1995
195lb ft
Operational
Operating Weight
9293lb
Power Train
Travel Speed - Forward Or Reverse - One Speed
5.2mph
Travel Speed - Forward Or Reverse - Two Speed
8mph
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Hydraulic System
Hydraulic Flow - High Flow Xps - Hydraulic Power (Calculated)
76hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow
23 gal/min
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
44hp
Hydraulic Flow - High Flow Xps - Maximum Loader Hydraulic Pressure
4061 psi
Hydraulic Flow - High Flow Xps - Maximum Loader Hydraulic Flow
32 gal/min
Operating Specifications
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1981 mm (78 in) dirt bucket, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Rated Operating Capacities - 50% Tipping Load
3290lb
Rated Operating Capacities - 35% Tipping Load
2303lb
Ground Contact Area
2561in2
Ground Pressure
3.6 psi
Rated Operating Capacity With Optional Counterweight
3540lb
Tipping Load
6580lb
Breakout Force - Tilt Cylinder
7285lb
Service Refill Capacities
Cooling System
3.7gal
Fuel Tank
24.8gal
Hydraulic Tank
10.3gal
Engine Crankcase
3gal
Hydraulic System
13.7gal
Cab
Rops
ISO 3471:2008
Fops
ISO 3449:2005 Level I
Fops Level Ii
ISO 3449:2005 Level II
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Noise Level
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab**
81 dB(A)
Outside Cab***
103 dB(A)
